Brass Ingot Mold
Brass Ingot Mold | |
---|---|
Basic Information | |
Removed: Alpha 13 | |
Group | Forging/Molds |
Category | Mold |
Scrapping/Forging Properties | |
Meltable | No |
Combustible | No |
Description
A Brass Ingot Mold is a craftable item used to cast brass into a Brass Ingot. Due to the fact a Brass Ingot Mold is not affected by durability it will not suffer any damage and will last indefinitely. As with all Molds it will only accept scrap items with the correct type of base material, in this case brass. For a current list of all brass based items check the page Brass. A Brass Ingot Mold cannot be scrapped, dismantled or melted in a Forge.
Usage
Along with a source of brass and a Combustible fuel, a Brass Ingot Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the Brass Ingot Mold will be used to cast a Brass Ingot.
Crafting
Required Items
It is very easy to craft a Brass Ingot Mold but before being able to do so you will require the following items.
- 5x Lump of Clay
Crafting Recipe
You can craft a Brass Ingot Mold by using the recipe below.
1 | 1 | |||||
1 | 1 | 1 | 1 | |||
Crafting time: 0:05 |
Notes
- If the mold is removed from the forge during casting it will cause the current part that is being cast to disappear and you will lose the metal already used by it.
de:Messingbarren-Gussform