SMG Barrel Mold
SMG Barrel Mold | |
---|---|
Basic Information | |
Removed: Alpha 13 | |
Group | Forging/Molds |
Category | Mold |
Scrapping/Forging Properties | |
Meltable | No |
Combustible | No |
Description
An SMG Barrel Mold is a craftable item that is placed in to a Forge and used to cast Scrap Iron into an SMG Barrel. Due to the fact an SMG Barrel Mold is not affected by durability it will not suffer any damage and last indefinitely. As with all Molds it will only accept scrap items with the correct type of base metal, in this case iron. For a current list of all iron based items check the page Scrap Iron. An SMG Barrel Mold cannot be scrapped, dismantled or melted in a Forge.
Usage
Along with a source of iron and a Combustible fuel, a SMG Barrel Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the SMG Barrel Mold will be used to cast a SMG Barrel.
Unlocking
Before you can craft an SMG Barrel Mold the recipe must be unlocked, this is done by reading the correct recipe book.
Crafting
Required Item
It is very easy to craft an SMG Barrel Mold but before being able do so you will require the following items.
- 5x Lump of Clay
- 1x SMG Barrel
Crafting Recipe
You can craft an SMG Barrel Mold by using the recipe below.
1 | ||||||
1 | 1 | 1 | ||||
1 | 1 | 1 | ||||
Crafting time: 0:05 |
Notes
- If the mold is removed from the forge during casting it will cause the current item that is being cast to disappear and you will lose the metal already used by it.
de:Maschinenpistolenlauf-Gussform