Shotgun Receiver Mold
Shotgun Receiver Mold | |
---|---|
Basic Information | |
Removed: Alpha 13 | |
Group | Forging/Molds |
Category | Mold |
Scrapping/Forging Properties | |
Meltable | No |
Combustible | No |
Description
A Shotgun Receiver Mold is a craftable item that is placed in to a Forge and used to cast Scrap Iron into a Shotgun Receiver. Due to the fact a Shotgun Receiver Mold is not affected by durability it will not suffer any damage and last indefinitely. As with all Molds it will only accept scrap items with the correct type of base metal, in this case iron. For a current list of all iron based items check the page Scrap Iron. A Shotgun Receiver Mold cannot be scrapped, dismantled or melted in a Forge.
Usage
Along with a source of iron and a Combustible fuel, a Shotgun Receiver Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the Shotgun Receiver Mold will be used to cast a Shotgun Receiver.
Unlocking
Before you can craft a Shotgun Receiver Mold the recipe must be unlocked, this is done by reading the correct recipe book.
Crafting
Required Item
It is very easy to craft a Shotgun Receiver Mold but before being able to do so you will require the following items.
- 5x Lump of Clay
- 1x Shotgun Receiver
Crafting Recipe
You can craft a Shotgun Receiver Mold by using the recipe below.
1 | ||||||
1 | 1 | 1 | ||||
1 | 1 | 1 | ||||
Crafting time: 0:05 |
Notes
- If the mold is removed from the forge during casting it will cause the current item that is being cast to disappear and you will lose the metal already used by it.
de:Schrotflintenverschluss-Gussform