Steel Arrowhead Mold
Steel Arrowhead Mold | |
---|---|
Basic Information | |
Removed: Alpha 13 | |
Group | Forging/Molds |
Category | Mold |
Scrapping/Forging Properties | |
Meltable | No |
Combustible | No |
Description
A Steel Arrowhead Mold is a craftable item that is placed in to a Forge and used to cast sources of iron into Steel Arrowhead. Due to the fact a Steel Arrowhead Mold is not affected by durability it will not suffer any damage and will last indefinitely. As with all molds it will only accept items with the correct type of base material, in this case iron. A Steel Arrowhead Mold cannot be scrapped, dismantled or melted in a Forge.
Unlocking
Usage
Along with a source of iron and a Combustible fuel, a Steel Arrowhead Mold is used by placing it into the 'Mold' slot in a Forge. Once the mold has been placed into its slot the 'Metal' slot will accept items of the correct type of material. Place the iron item you intend to melt into the 'Metal' slot and place your fuel source into one of the three 'Fuel' slots. The casting process will begin and the Steel Arrowhead Mold will be used to cast Steel Arrowhead.
Crafting
Required Item
It is very easy to craft a Steel Arrowhead Mold and you will require the following items to do so.
- 5x Lump of Clay
- 1x Steel Arrowhead
Crafting Recipe
You can craft a Steel Arrowhead Mold by using the recipe below.
1 | ||||||
1 | 1 | 1 | ||||
1 | 1 | 1 | ||||
Crafting time: 0:05 |
Notes
- If the mold is removed from the forge during casting it will cause the current part that is being cast to disappear and you will lose the metal already used by it.