Lead Ingot Mold
Lead Ingot Mold | |
---|---|
Basic Information | |
Removed: Alpha 13 | |
Group | Forging/Molds |
Category | Mold |
Scrapping/Forging Properties | |
Meltable | No |
Combustible | No |
Description
A Lead Ingot Mold is a craftable item that is placed in to a Forge and used to cast Scrap Lead into Lead Ingots. Due to the fact a Lead Ingot Mold is not affected by durability it will not suffer any damage and last indefinitely. As with all Molds it will only accept scrap items with the correct type of base metal, in this case lead. For a current list of all lead based items check the page Scrap Lead. A Lead Ingot Mold cannot be scrapped, dismantled or melted in a Forge.
Usage
Along with a source of lead and a Combustible fuel, a Lead Ingot Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the Lead Ingot Mold will be used to cast a lead Ingot.
Crafting
Required Item
It is very easy to craft a Lead Ingot Mold but before being able to do so you will require the following items.
- 5x Lump of Clay
Crafting Recipe
You can craft a Lead Ingot Mold by using the recipe below.
1 | 1 | 1 | ||||
1 | 1 | 1 | ||||
Crafting time: 0:05 |
Notes
- If the mold is removed from the forge during casting it will cause the current part that is being cast to disappear and you will lose the metal already used by it.
de:Bleibarren-Gussform